Category:Teletype

Pages in category "Teletype"

The following 4 pages are in this category, out of 4 total.

Media in category "Teletype"

The following 39 files are in this category, out of 39 total.

• 
  32 and 33 pedestal to TTY screw 1 quarter by 14, self tapping.JPG 1,600 × 1,200; 408 KB
  
• 
  32 and 33 serial number, carriage spring removed.JPG 1,600 × 1,200; 1.19 MB
  
• 
  32 and 33 Training Manual 2.pdf 0 × 0; 8.64 MB
  
• 
  33 typewheel code chart.jpg 1,232 × 784; 114 KB
  
• 
  Answerback.JPG 449 × 394; 192 KB
  
• 
  ASR32TopCoverRemoved.JPG 1,374 × 1,124; 1.23 MB
  
• 
  Basic products used in 33 work.JPG 1,600 × 1,200; 645 KB
  
• 
  Basic tools used in 33 work.JPG 1,600 × 1,200; 637 KB
  
• 
  Chad box and cardboard sub.JPG 1,600 × 1,200; 287 KB
  
• 
  Distributor Faceplate.JPG 1,069 × 799; 319 KB
  
• 
  EOL stop clip.JPG 662 × 436; 195 KB
  
• 
  Front printer shipping screw location with screw installed.JPG 1,600 × 1,200; 711 KB
  
• 
  H Plate installed.JPG 1,600 × 1,200; 1.2 MB
  
• 
  Here Is tab properly installed.JPG 1,600 × 1,200; 1.01 MB
  
• 
  Kybd reset lever in reset position (green arrow) and spring (red circle).JPG 1,600 × 1,200; 574 KB
  
• 
  Kybd reset lever tripped.JPG 1,600 × 1,200; 316 KB
  
• 
  LF sub 2.JPG 1,600 × 1,200; 300 KB
  
• 
  LF sub tubing.JPG 1,600 × 1,200; 314 KB
  
• 
  LF sub.JPG 1,600 × 1,200; 315 KB
  
• 
  Line Local Relay Location.JPG 1,600 × 1,200; 337 KB
  
• 
  Line Local Relay removed for inspection.jpg 1,280 × 960; 202 KB
  
• 
  Manual CR lever RED and enable spacing lever BLUE.JPG 1,600 × 1,200; 262 KB
  
• 
  Motor oil hole A.JPG 1,600 × 1,200; 679 KB
  
• 
  Motor oil hole B.JPG 1,600 × 1,200; 634 KB
  
• 
  No tape.JPG 964 × 1,030; 771 KB
  
• 
  Oil pad in place.JPG 1,600 × 1,200; 453 KB
  
• 
  Pedestal holes used for 33 mount.JPG 1,554 × 1,136; 1,016 KB
  
• 
  Printer removal tools.JPG 1,265 × 660; 223 KB
  
• 
  Printer shipping screws location from underside.JPG 1,600 × 1,200; 165 KB
  
• 
  Rangefinder pointer.JPG 905 × 800; 617 KB
  
• 
  Rangefinder semi-captive plastic nut.JPG 654 × 580; 356 KB
  
• 
  Tape loaded.JPG 876 × 891; 657 KB
  
• 
  Tape punch spindle sub 1 and 1 half inch ID PVC cut 3 8ths long.JPG 1,600 × 1,200; 1.25 MB
  
• 
  Tape reader latch top view.JPG 674 × 440; 116 KB
  
• 
  Tape reader latch.JPG 752 × 696; 189 KB
  
• 
  Tape reader power supply in pedestal.JPG 1,312 × 735; 618 KB
  
• 
  Top View.JPG 924 × 838; 703 KB
  
• 
  TR pulsing area.JPG 1,600 × 1,200; 1.23 MB
  
• 
  UCC-6 FS 1 Receive all on one page.JPG 1,345 × 1,102; 952 KB