Difference between revisions of "20ma current loop to RS-232 conversion"
(Added detail of tty - RS232 board and terminal strips.) |
(Add Teletype 101 link.) |
||
Line 9: | Line 9: | ||
==other resources== | ==other resources== | ||
+ | * Helpful article, [http://www.vintagecomputer.net/teletype101.cfm Teletype 101] from vintagecomputer.net | ||
* Another circuit. From [[http://altairclone.com/teletype.htm Altairclone]] Specifically designed to fit in a Teletype model 33 using only a 12vdc wall wart for power. | * Another circuit. From [[http://altairclone.com/teletype.htm Altairclone]] Specifically designed to fit in a Teletype model 33 using only a 12vdc wall wart for power. | ||
− | * Another [https://www.circuitlab.com/circuit/mnartk/screenshot/1024x768/ circuit] I found referenced on the greenkeys email list | + | * Another [https://www.circuitlab.com/circuit/mnartk/screenshot/1024x768/ circuit] I found referenced on the greenkeys email list |
==My ASR hookup== | ==My ASR hookup== |
Revision as of 00:12, 21 August 2015
Contents
20ma current loop <> RS-232 conversion
Vintage PCB
Dig this crazy circuit board man! Still in it's original packaging from Hobby World Electronics in Northridge California.
other resources
- Helpful article, Teletype 101 from vintagecomputer.net
- Another circuit. From [Altairclone] Specifically designed to fit in a Teletype model 33 using only a 12vdc wall wart for power.
- Another circuit I found referenced on the greenkeys email list
My ASR hookup
I built the circuit described above from the altairclone site. I found the Teletype 101 article helpful for identifying the proper terminal strip locations. The interface works. I set baud to 110, with 7 bits and 'mark' parity in TeraTerm on a windows 8 notebook with a Gigaware USB<> serial convereter.
Signal screw terminal my wire color
---------------------------------------------------------------------
Transmitted data send (+) 7 orange
Transmitted data return (-) 6 brown
Received data send (+) 4 red
Received data return (-) 3 black