20ma current loop to RS-232 conversion

From The Retro Wagon wiki
Revision as of 00:09, 21 August 2015 by Jeffa (talk | contribs) (Added detail of tty - RS232 board and terminal strips.)
Jump to navigation Jump to search

20ma current loop <> RS-232 conversion

Vintage PCB

Dig this crazy circuit board man! Still in it's original packaging from Hobby World Electronics in Northridge California.

other resources

  • Another circuit. From [Altairclone] Specifically designed to fit in a Teletype model 33 using only a 12vdc wall wart for power.
  • Another circuit I found referenced on the greenkeys email list

My ASR hookup

I built the circuit described above from the altairclone site. I found the Teletype 101 article helpful for identifying the proper terminal strip locations. The interface works. I set baud to 110, with 7 bits and 'mark' parity in TeraTerm on a windows 8 notebook with a Gigaware USB<> serial convereter. 

Signal                      screw terminal          my wire color
---------------------------------------------------------------------
Transmitted data send (+)      7          orange
Transmitted data return (-)    6          brown

Received data send (+)         4          red
Received data return (-)       3          black

Retrieved from "https://wiki.theretrowagon.com/index.php?title=20ma_current_loop_to_RS-232_conversion&oldid=358"