CompuPro Interfacer 3

From TheRetroWagon
Jump to: navigation, search

Interfacer 3 page mainly to document mex integration.


This config in MEX will use the serial connection on the far left hand side of the Interfacer 3

set baud 9600
set port 7
; be sure the correct stop bits etc. are set corectly
; In TeraTerm I found it helpful to set the 1k block checkbox. 
; to receive using xmodem, M for modem 7; 'mr filename'


Interfacer 3

CompuPro Interfacer 3.pdf

Mex overlay

extract the .asm file