CompuPro Interfacer 3

From TheRetroWagon
Revision as of 18:41, 18 December 2020 by Jeffa (talk | contribs) (Initial creation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Interfacer 3 page mainly to document mex integration.

Images

  • CompuPro Interfacer 3 Front.jpg
  • CompuPro Interfacer 3 Rear.jpg

This config in MEX will use the serial connection on the far left hand side of the Interfacer 3 

  
set baud 9600
set port 7

Documentation

Interfacer 3

CompuPro Interfacer 3.pdf

Mex overlay

extract the .asm file

Retrieved from "https://wiki.theretrowagon.com/w/index.php?title=CompuPro_Interfacer_3&oldid=1527"