Difference between revisions of "Ithaca Intersystems DPS-1"

From TheRetroWagon
Jump to: navigation, search
(Images)
(Resources: Added other sites.)
Line 32: Line 32:
 
* [[:File:Ithaca Intersystems 64K DRAM Rev 0 Manual 1980.pdf|Ithaca Intersystems 64K DRAM Rev 0 Manual 1980]]
 
* [[:File:Ithaca Intersystems 64K DRAM Rev 0 Manual 1980.pdf|Ithaca Intersystems 64K DRAM Rev 0 Manual 1980]]
 
* [[:File:Ithaca Intersystems Series II MPU-80.pdf|Ithaca Intersystems Series II MPU-80]]
 
* [[:File:Ithaca Intersystems Series II MPU-80.pdf|Ithaca Intersystems Series II MPU-80]]
 +
===Other sites===
 +
*[http://www.ricomputermuseum.org/Home/small-systems-at-ricm/intersystems-dps-1 Ricm Computer Museum]
 +
*[http://www.old-computers.com/museum/computer.asp?st=1&c=574 Old Computers .com]
 +
*[http://www.thepcmuseum.net/details.php?RECORD_KEY(museum)=id&id(museum)=159&PHPSESSID=11a2b6a9a752e55ae045f4e7697e1892 PC Museum Collection]
 +
*[http://www.retrotechnology.com/herbs_stuff/d_ithaca.html Retro Technology Ithaca Audio, Intersystems S-100 Herb Johnson]
 +
  
  

Revision as of 18:24, 20 April 2017

Functional front panel and z80 board. Pictured running the port FF test program testing input and output to port 0xFF. Note the corresponding programmed output LEDs to the Address-Programmed Input

See the clear vinyl bubbled up? I'm not sure if that was part of the shipping that you peel off, or a protective layer meant to be a permanent part of the system. Needs attention RSN.

I have a Intersystems Model 950 set of disk drives working too. I've got a bit of RTFM to do first before trying to boot any media I may have.
Intersystems Model 950 disk drives

I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid.

Images

Front View Running Port FF Test.jpg

Front panel rear view key detail.jpg

Detail of key lock (in case I rekey)

Ithaca Chasis Front view without FP.jpg

The chassis has threaded attached standoffs. Quite a lot easier to reassemble this FP than the Imsai FPs. Rock solid power supply voltage tested with my EEVBlog meter.

Ithaca Front panel PCB.jpg

Lot's of options on this FP

Resources

Manuals

I found these manuals here at https://amaus.net/static/S100/intersystems/

Other sites