Difference between revisions of "Ithaca Intersystems DPS-1"
(Add manuals) |
|||
| Line 7: | Line 7: | ||
I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid. | I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid. | ||
| − | + | ==Images== | |
[[File:Front View Running Port FF Test.jpg|800px]] | [[File:Front View Running Port FF Test.jpg|800px]] | ||
Revision as of 17:57, 20 April 2017
Functional front panel and z80 board. Pictured running the port FF test program testing input and output to port 0xFF. Note the corresponding programmed output LEDs to the Address-Programmed Input
See the clear vinyl bubbled up? I'm not sure if that was part of the shipping that you peel off, or a protective layer meant to be a permanent part of the system. Needs attention RSN.
I have a Intersystems Model 950 set of disk drives working too. I've got a bit of RTFM to do first before trying to boot any media I may have.
I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid.
Images
Detail of key lock (in case I rekey)
The chassis has threaded attached standoffs. Quite a lot easier to reassemble this FP than the Imsai FPs. Rock solid power supply voltage tested with my EEVBlog meter.
Lot's of options on this FP
Resources
Manuals
I found these manuals here at https://amaus.net/static/S100/intersystems/
