Difference between revisions of "Ithaca Intersystems DPS-1"
(Add serial number) |
(→Boards: DOH! Forgot the SIO board....) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid. | I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid. | ||
| + | |||
| + | ==Operating== | ||
| + | ===DPS-1 boot video=== | ||
| + | Check out [http://rodaw.me/2prN7UP this] YouTube video of the DPS-1 booting from eight inch double sided double density Shugart floppy disk drives. | ||
==Images== | ==Images== | ||
[[File:Front View Running Port FF Test.jpg|800px]] | [[File:Front View Running Port FF Test.jpg|800px]] | ||
| + | |||
| + | [[File:Intersystems DPS-1 Top Open.jpg|800px]] | ||
[[File:Front panel rear view key detail.jpg|400px]] | [[File:Front panel rear view key detail.jpg|400px]] | ||
| + | |||
| + | ===Boards=== | ||
| + | <gallery > | ||
| + | File:Intersystems MPU-80 IA-2000 Rev B.jpg|MPU-80 IA-2000 Rev B | ||
| + | File:Intersystems IA-2030 64K Dynamic Ram Rev B.jpg|IA-2030 64K Dynamic Ram Rev B | ||
| + | File:Intersystems FDC 2 IA-2020 Rev C.jpg|FDC 2 IA-2020 Rev C | ||
| + | File:Intersystems IA-30 6 SIO Rev 0.jpg|IA-30 6 SIO Rev 0 | ||
| + | </gallery> | ||
Detail of key lock (in case I rekey) | Detail of key lock (in case I rekey) | ||
Latest revision as of 23:59, 16 August 2019
Functional front panel and z80 board. Pictured running the port FF test program testing input and output to port 0xFF. Note the corresponding programmed output LEDs to the Address-Programmed Input
Serial No. MFD-1107
See the clear vinyl bubbled up? I'm not sure if that was part of the shipping that you peel off, or a protective layer meant to be a permanent part of the system. Needs attention RSN.
I have a Intersystems Model 950 set of disk drives working too. I've got a bit of RTFM to do first before trying to boot any media I may have.
I removed all the boards and the front panel (FP) board before testing the power supply. It was rock solid.
Contents
Operating
DPS-1 boot video
Check out this YouTube video of the DPS-1 booting from eight inch double sided double density Shugart floppy disk drives.
Images
Boards
MPU-80 IA-2000 Rev B
IA-2030 64K Dynamic Ram Rev B
FDC 2 IA-2020 Rev C
IA-30 6 SIO Rev 0
Detail of key lock (in case I rekey)
The chassis has threaded attached standoffs. Quite a lot easier to reassemble this FP than the Imsai FPs. Rock solid power supply voltage tested with my EEVBlog meter.
Lot's of options on this FP
Resources
Manuals
I found these manuals here at https://amaus.net/static/S100/intersystems/
- Ithaca Intersystems Z80 CPU Manual 1977
- Ithaca Intersystems Hard Disk Adaptor
- Ithaca Intersystems Front Panel
- Ithaca Intersystems FDC-2 Disk Controller Manual
- Ithaca Intersystems FDC-2 Bootstrap
- Ithaca Intersystems 64K DRAM Rev 0 Manual 1980
- Ithaca Intersystems Series II MPU-80
Found at the Internet Archives
- Ithaca Standard BIOS Helpful information for boot.
