Parts
These are some parts I've used to restore some vintage computers. Jog my memory so I can order again. Perhaps you'll find them useful
Altair
The connector between the CPU and front panel boards
Capacitors
On Sat, Jan 6, 2018 at 3:00 PM, Cameron Cooper redacted [altaircomputerclub] <altaircomputerclub@yahoogroups.com> wrote:
Figured I'd throw in my two cents here. When restoring vintage equipment I really like to keep them as original as possible, including using the correct new old stock parts when I can. However, when it came to restoring the power supply on my Altair I decided to go with brand new Vishay capacitors from Mouser. Sure it doesn't have the exact same look as the originals, but I have a lot more faith that my new capacitors will continue to work well into the future.
If you want to go this route, here are the capacitors you'll need from Mouser:
- 6 of these: http://www.mouser.com/ProductDetail/Vishay/MAL202116332E3/?qs=%2fha2pyFadugFFWLu25QyYrPoN9LlIVxvOtf%2fEAjYETzFgsa3WY7t2Q%3d%3d
- 1 of these: http://www.mouser.com/ProductDetail/Vishay/MAL202116222E3/?qs=%2fha2pyFadugFFWLu25QyYqxCOdz%2fB%252bvmhW7a3iormdxPRi2AgSRB7g%3d%3d
- 1 of these: http://www.mouser.com/ProductDetail/Vishay/TVA1209/?qs=%2fha2pyFadujX3auk1NrQ%2fQbR3ooQXa%252btx0H4%252b1TV%252bF0%3d
I've also included a photo of what they look like installed.
Cameron
Sol-20
- Power switch Oslo Switch SLA7A12V1M9
- Power inlet Schurter 6100.3100
