Difference between revisions of "Parts"

From TheRetroWagon
Jump to: navigation, search
(Added Altair power supply Capacitors)
(front panel: mouser paddles)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Blockquote | These are some parts I've used to restore some vintage computers. Jog my memory so I can order again. Perhaps you'll find them useful}}
 
{{Blockquote | These are some parts I've used to restore some vintage computers. Jog my memory so I can order again. Perhaps you'll find them useful}}
 +
=Vendors=
 +
*[https://www.arrow.com/ Arrow Electronics]
 +
*[https://www.digikey.com/ Digikey Electronics]
 +
*[https://www.jameco.com/ Jameco Electronics ]
 +
*[https://www.mouser.com/ Mouser]
 +
*[http://www.newark.com/ Newark kelement14]
 +
*[https://www.avnet.com/wps/portal/us/ Avnet]
 +
*[http://candhsurplus.com/ C&H Surplus]
 +
*[http://www.mpja.com/MPJA MPJA]
 +
*[https://www.peconnectors.com/ Phoenix Enterprises] Great for connectors
 +
*[http://www.electronicsurplus.com/ Electronic Surplus]
 +
*[https://www.unicornelex.com/ Unicorn Electronics]
 +
*[http://anchor-electronics.com/ Anchor Electronics]
 +
*[https://www.utsource.net/ Utsource]
 +
*[https://www.polycase.com/ polycase]
 +
*[http://www.maxkeyboard.com/products/cherry-mx-keycap/ maxkeyboard]
 +
*[https://mechanicalkeyboards.com/shop/index.php?l=product_list&c=40 mechanicalkeyboards.com]
 +
 
=Altair=
 
=Altair=
 
==The connector between the CPU and front panel boards==
 
==The connector between the CPU and front panel boards==
Line 9: Line 27:
 
==Capacitors==
 
==Capacitors==
  
On Sat, Jan 6, 2018 at 3:00 PM, Cameron Cooper ''redacted'' [altaircomputerclub] <altaircomputerclub@yahoogroups.com> wrote:
+
From a discussion on the altaircomputerclub Yahoo group <altaircomputerclub@yahoogroups.com>
 
 
Figured I'd throw in my two cents here. When restoring vintage equipment I really like to keep them as original as possible, including using the correct new old stock parts when I can. However, when it came to restoring the power supply on my Altair I decided to go with brand new Vishay capacitors from Mouser. Sure it doesn't have the exact same look as the originals, but I have a lot more faith that my new capacitors will continue to work well into the future.
 
 
 
If you want to go this route, here are the capacitors you'll need from Mouser:
 
 
 
*    6 of these: http://www.mouser.com/ProductDetail/Vishay/MAL202116332E3/?qs=%2fha2pyFadugFFWLu25QyYrPoN9LlIVxvOtf%2fEAjYETzFgsa3WY7t2Q%3d%3d
 
*    1 of these: http://www.mouser.com/ProductDetail/Vishay/MAL202116222E3/?qs=%2fha2pyFadugFFWLu25QyYqxCOdz%2fB%252bvmhW7a3iormdxPRi2AgSRB7g%3d%3d
 
*    1 of these: http://www.mouser.com/ProductDetail/Vishay/TVA1209/?qs=%2fha2pyFadujX3auk1NrQ%2fQbR3ooQXa%252btx0H4%252b1TV%252bF0%3d
 
 
 
I've also included a photo of what they look like installed.
 
 
 
Cameron
 
  
 +
* 6 of these: [http://www.mouser.com/ProductDetail/Vishay/MAL202116332E3/?qs=%2fha2pyFadugFFWLu25QyYrPoN9LlIVxvOtf%2fEAjYETzFgsa3WY7t2Q%3d%3d Aluminum Electrolytic Capacitors - Leaded 3300uF 25V 20% Axial]
 +
* 1 of these: [http://www.mouser.com/ProductDetail/Vishay/MAL202116222E3/?qs=%2fha2pyFadugFFWLu25QyYqxCOdz%2fB%252bvmhW7a3iormdxPRi2AgSRB7g%3d%3d Aluminum Electrolytic Capacitors - Leaded 2200uF 25V 20% Axial]
 +
* 1 of these: [http://www.mouser.com/ProductDetail/Vishay/TVA1209/?qs=%2fha2pyFadujX3auk1NrQ%2fQbR3ooQXa%252btx0H4%252b1TV%252bF0%3d Aluminum Electrolytic Capacitors - Leaded 25V 500uF]
  
 
=Sol-20=
 
=Sol-20=
 
+
==A/C Power==
 
* [https://www.onlinecomponents.com/oslo-switch-sla7a12v1m9.html?p=45283610 Power switch] Oslo Switch SLA7A12V1M9
 
* [https://www.onlinecomponents.com/oslo-switch-sla7a12v1m9.html?p=45283610 Power switch] Oslo Switch SLA7A12V1M9
 
* [https://www.onlinecomponents.com/schurter-61003100.html?p=12642714 Power inlet] Schurter 6100.3100
 
* [https://www.onlinecomponents.com/schurter-61003100.html?p=12642714 Power inlet] Schurter 6100.3100
 +
 +
=Imsai 8080=
 +
==front panel==
 +
* [https://www.mcmaster.com/91255a155 Button Head Hex Drive Screw] Black-Oxide Alloy Steel, 6-32 Thread, 1-1/4" Long [https://groups.google.com/d/msg/s100computers/nbAgbT-ohpw/DedFJLf4AAAJ Thanks Greg]
 +
* [https://www.mouser.com/Search/Refine?Keyword=AT4157 replacement switch paddles]. Thanks Rob

Latest revision as of 03:29, 19 June 2019

These are some parts I've used to restore some vintage computers. Jog my memory so I can order again. Perhaps you'll find them useful

Vendors

Altair

The connector between the CPU and front panel boards

Capacitors

From a discussion on the altaircomputerclub Yahoo group <altaircomputerclub@yahoogroups.com>

Sol-20

A/C Power

Imsai 8080

front panel